Acquisition Control 12
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 173
Navigating Segments
1 In the Segmented dialog box, select the Current Seg field, and turn the Entry
knob to display the desired segment along with a time tag indicating the time
from the first trigger event.
You can also navigate segments using the Analyze > Navigate... menu item, the
Navigate dialog box, and its controls. See
"To navigate segments" on page 53.
Measurements, Statistics, and Infinite Persistence with Segmented
Memory
To perform measurements and view statistical information, choose Measure >
Measurements... from the main menu and set up your desired measurements (see
Chapter 14, “Measurements,” starting on page 185). Then, in the Segmented
dialog box, select Analyze Segments. Statistical data will be accumulated for the
measurements you have chosen.
When the segmented memory feature is on and acquisitions is stopped, the
Analyze Segments button is available when features like measurements, infinite
persistence, histograms, or protocol listing are on.
Segmented Memory Re-Arm Time
After each segment fills, the oscilloscope re-arms and is ready to trigger in about
1 µs.
To Next Page
Loading...
