108 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
7 Digital Channels
Activity indicator When any digital channels are turned on, an activity indicator is displayed in the
status line at the bottom of the display. A digital channel can be always high ( ),
always low ( ), or actively toggling logic states ( ).
To change the displayed size of the digital channels
1 Open the Digital dialog box by selecting the digital channels badge or by
choosing Sources > Digital Channels....
2 In the Channels tab, use the Waveform Size drop-down list to select the size of
displayed digital channels.
The sizing control lets you spread out or compress the digital traces vertically on
the display for more convenient viewing.
Activity
indicators
Delay
time
Time/
div
Trigger
type and
threshold
Digital channel
identifiers
Waveform
size
Turn individual
channels on/off
Thresholds
tab
Trigger
mode and
run status
To Next Page
Loading...
