Utility Settings 22
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 291
To return the instrument
Before shipping the oscilloscope to Keysight Technologies, contact your nearest
Keysight Technologies sales or service office for additional details. Information on
contacting Keysight Technologies can be found at:
www.keysight.com/find/contactus
1 Write the following information on a tag and attach it to the oscilloscope.
• Name and address of owner.
• Model number.
• Serial number.
• Description of service required or failure indication.
2 Remove accessories from the oscilloscope.
Only return accessories to Keysight Technologies if they are associated with the
failure symptoms.
3 Package the oscilloscope.
You can use the original shipping container, or provide your own materials
sufficient to protect the instrument during shipping.
4 Seal the shipping container securely, and mark it FRAGILE.
Configuring the (Quick Action) Menu Item
The Setup > (Quick Action) menu item lets you quickly perform common, repetitive
actions. The (Quick Action) menu item can also be added to the Favorites menu for
even faster access.
To configure the (Quick Action) menu item:
1 From the main menu, choose Setup > Quick Action Setup....
2 From the Quick Action Setup dialog box's Action drop-down list, select:
• Off — disables the (Quick Action) menu item.
• Quick Measure — quickly adds 10 common measurements. The Source
pull-down list lets you select the waveform source (which also becomes the
source selection in the Measurements dialog box). See
"To quickly add 10
common measurements"
on page 186.
• Quick Measure Statistics Reset — resets all measurement statistics and the
measurement count. See "Measurement Statistics" on page 209.
• Quick Mask Statistics Reset — resets mask statistics and counters. See "Mask
Statistics"
on page 225.
• Quick Histogram Statistics Reset — resets all histogram statistics. See
"Histogram Data Statistics" on page 219.
To Next Page
Loading...
