Keysight InfiniiVision HD3 Series - Reference Waveforms; To Save a Waveform to a Reference Waveform Location

99
Keysight InfiniiVision HD3-Series Oscilloscopes
User's Guide
6 Reference Waveforms
To save a waveform to a reference waveform location / 99
To display a reference waveform / 100
To scale and position reference waveforms / 100
To adjust reference waveform skew / 101
To display reference waveform summary information / 101
To save/recall reference waveform files to/from a USB storage device / 101
Analog channel or math waveforms can be saved to one of two reference
waveform locations in the oscilloscope. Then, a reference waveform can be
displayed and compared with other waveforms.
You can adjust the scale, position, and skew of reference waveforms, and you can
display summary information for all reference waveforms.
Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. You can recall a reference waveform file
from a USB storage device into one of the reference waveform locations.
To save a waveform to a reference waveform location
1 From the menu, choose Sources > Reference Waveforms....
The Reference Waveform dialog box has tabs for the two available reference
waveforms, R1 and R2.
2 In the tab for the reference waveform location you want to use, select the Source
you want to save.
3 Select Save to R1/R2 to save the waveform to the reference waveform location.
On is automatically selected and the reference waveform is displayed.
NOTE
Reference waveforms are non-volatile — they remain after power cycling or performing a
default setup.