Measurements 14
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 209
Measurement Window
You can choose whether measurements are made in the Main window portion of
the display, the Zoom window portion of the display (when the zoomed time base
is displayed), or gated by the X1 and X2 markers.
1 From the menu, choose Measure > Measurements....
2 In the Measurements dialog box, select the Settings tab.
3 From the Meas Window drop-down list, you can select:
• Auto Select — When the zoomed time base is displayed, the measurement is
attempted in the zoomed time base window; if it cannot be made there, or if
the zoomed time base is not displayed, the Main window is used.
• Main — The measurement window is the Main window.
• Zoom — The measurement window is the zoomed time base window.
• Gated by Markers — The measurement window is between the X1 and X2
markers. When the zoomed time base is displayed, the X1 and X2 markers in
the Zoom window portion of the display are used.
Measurement Statistics
To display measurement statistics:
1 From the menu, choose Measure > Measurements....
2 In the Measurements dialog box, select the Settings tab.
3 In the Statistics area, select On to enable or disable the display of measurement
statistics.
When enabled, measurement statistics appear in the Measurements window in
the Results pane.
To Next Page
Loading...
