186 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
14 Measurements
To quickly add 10 common measurements
1 From the menu, choose Measure > Quick Measure > Channel N.
Ten common measurements are added for the selected channel and displayed
in the Results area.
Statistics are displayed if they are enabled in the Settings tab of the
Measurements dialog box. See
"Measurement Statistics" on page 209.
Markers are displayed for a selected measurement to show the portion of the
waveform being measured. To view the markers for a different measurement,
select it in the Results area.
In the Results area, you can right-click a measurement to:
• Delete the selected measurement.
• Delete all measurements.
• Show or hide statistics.
• Reset statistics.
• Move the measurement up in the list.
• Move the measurement down in the list.
To Next Page
Loading...
