LIN Triggering and Protocol Decode 27
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 345
Interpreting LIN Lister Data
In addition to the standard Time column, the LIN Lister contains these columns:
• ID — frame ID. Can be displayed as hex digits or symbolic information (see
"Loading and Displaying LIN Symbolic Data" on page 342).
• Data — data bytes. Can be displayed as hex digits or symbolic information.
• Checksum.
• Errors — highlighted in red.
Aliased data is highlighted in pink. When this happens, decrease the horizontal
time/div setting and run again.
Searching for LIN Data in the Lister
The oscilloscope's search capability lets you search for (and mark) certain types of
LIN data in the Lister (see
"Searching Lister Data" on page 121). Then, you can
use the navigation controls to navigate through the marked rows (see "Navigating
the Time Base"
on page 52).
The Search dialog box controls unique to the PN: LIN search type selection are:
• Search for — Selects the decode value to find:
• ID — Finds frames with the specified ID. Enter the ID in the Frame ID field.
To Next Page
Loading...
