Histogram 15
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 217
Measurement Histogram Set Up
Measurement histograms show the distribution of a measurement's results similar
to ordinary measurement statistics.
To set up a measurement histogram:
1 First, add the measurement whose results you want to display as a histogram.
See "To make automatic measurements" on page 187.
2 Turn on measurement histogram analysis.
You can:
a From the menu, choose Measure > Measurements....
b In the Measurements dialog box, select the Histogram tab.
Or, you can:
a From the menu, choose Analyze > Histogram....
b In the Histogram dialog box, select On.
c From the Type drop-down list, select Measurements.
3 From the Measurement drop-down list, select the measurement to analyze.
4 In the Histogram Size field, specify the number of divisions the histogram bar
graph should use. You can choose whole and half divisions from 1 to 4.
For measurement histograms, information about the scale of the bar graph
appears in the grid. This scale is automatically determined.
You can select Reset Histogram to zero the histogram counters.
To Next Page
Loading...
