216 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
15 Histogram
Defining the Histogram Limits Window
You can define the histogram limits window using the Limits area controls in the
Histogram dialog box.
Use the Top Limit, Bottom Limit, Left Limit, and Right Limit fields to define the limits
window in which waveform crossings (hits) measured. Selecting the field name lets
you use the Entry knob to adjust the field value.
Select Default Window to set up a limits window that is six divisions tall and eight
divisions wide, centered on the graticule.
You can also define the histogram limits window using the touchscreen. When you
select the limits window, you can drag it on the screen.
The lower right corner touch handle changes the size of the window.
The upper right corner edit (pencil) icon opens the Histogram dialog box.
To Next Page
Loading...
