Keysight InfiniiVision HD3 Series - Save;Email;Recall (Setups, Screens, Data); Saving Setups, Screen Images, or Data

261
Keysight InfiniiVision HD3-Series Oscilloscopes
User's Guide
21 Save/Email/Recall (Setups,
Screens, Data)
Saving Setups, Screen Images, or Data / 261
Emailing Setups, Screen Images, or Data / 267
Recalling Setups, Masks, or Data / 269
Recalling Default Setups / 271
Performing a Secure Erase / 272
Oscilloscope setups, reference waveforms, and mask files can be saved to internal
oscilloscope memory or to a USB storage device and recalled later. You can also
recall default or factory default setups.
Oscilloscope screen images can be saved to a USB storage device in BMP or PNG
formats.
Acquired waveform data can be saved to a USB storage device in
comma-separated value (CSV), ASCII XY, and binary (BIN) formats.
Any file that can be saved to a USB storage device can also be e-mailed over the
network.
There is also a command to securely erase all the oscilloscope's non-volatile
internal memory.
Saving Setups, Screen Images, or Data
1 From the main menu, choose File > Save....
2 In the Save dialog box, from the Format drop-down menu, select the type of file
you want to save:
• Setup (*.scp) — The oscilloscope's horizontal timebase, vertical sensitivity,
trigger mode, trigger level, measurements, markers, and math function
settings that tell the oscilloscope how to make a particular measurement.
See "To save setup files" on page 263.