Protocol Decode 8
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 121
When zoomed out and viewing a large number of packets, the Protocol Listing
may not be able to display information for all packets. However, when you
press the [Single] key the Protocol Listing will contain all on-screen serial
decode information.
6 When acquisitions are stopped, you can use the Event field to select a Protocol
Listing row (or if the row is displayed, you can directly select it), and then select
Zoom to Selection to center the waveform display and zoom the horizontal scale
to the selected Protocol Listing row.
7 Select Undo Zoom to return to the horizontal scale and delay (position) settings
before the last Zoom to Selection.
Searching Lister Data
When protocol decode is enabled, you can use the Search feature to find and
place marks on rows in the Lister.
The Search dialog box lets you specify events to find. It is similar to specifying
protocol triggers.
Events found are marked in orange in the far left Lister column. The total number
of events found is displayed with the Search events found table title.
To Next Page
Loading...
