Digital Channels 7
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 107
Any digital channel with an active signal will be displayed. Any digital channels
without active signals will be turned off.
• If you want to return to the oscilloscope settings that existed before, select the
Undo button.
This is useful if you have unintentionally pressed the [Auto Scale] key or do not
like the settings Autoscale has selected. This will return the oscilloscope to its
previous settings. See also:
"How Autoscale Works" on page 28.
To set the instrument to the factory-default configuration, press the [Default Setup]
key.
Interpreting the digital waveform display
The following figure shows the Digital dialog box (select the digital channels
badge or choose Sources > Digital Channels...) and displayed digital channels.
Figure 19 Example: Autoscale of digital channels
To Next Page
Loading...
