24 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
1 Getting Started
Tilt the Oscilloscope for Easy Viewing
There are tabs under the oscilloscope's front feet that can be flipped out to tilt the
oscilloscope.
6. AUX OUT
connector
Auxiliary output BNC connector. See
"Setting the Rear Panel AUX
OUT Source" on page 282.
7. AUX TRIG IN
connector
Auxiliary trigger input BNC connector. See
"External Trigger Input" on
page 159 for an explanation of this feature.
8. Digital channel
inputs
Connect the digital probe cable to this connector. See
Chapter 7, “Digital
Channels,” starting on page 103.
9. Kensington lock
hole
This is where you can attach a Kensington lock for securing the instrument.
To Next Page
Loading...
