Keysight InfiniiVision HD3 Series - To Save Arbitrary Waveforms; Emailing Setups, Screen Images, or Data

Save/Email/Recall (Setups, Screens, Data) 21
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 267
See Also • Chapter 16, “Mask Testing,” starting on page 221
To save arbitrary waveforms
Arbitrary waveform files can be saved to internal (\User Files) locations or to an
external USB storage device.
1 From the main menu, choose File > Save....
2 In the Save dialog box, from the Format drop-down menu, select Arbitrary
Waveform data (*.csv).
3 Select the File Name field, and enter the name of the file you want to save.
4 Use the controls in the bottom of the dialog box to navigate to the location of
the file to be saved.
5 Select Save.
See Also • "To edit arbitrary waveforms" on page 254
Emailing Setups, Screen Images, or Data
You can send oscilloscope files over the network via e-mail. You can e-mail any file
that can be saved.
To e-mail a setup, screen image, or data file:
1 Make sure the oscilloscope is connected to the local area network (see
"To
establish a LAN connection"
on page 275).
2 From the main menu, choose File > Email....
3 In the Email dialog box, select the Configure tab:
NOTE
Masks are also saved as part of setup files. See "To save setup files" on page 263.