Digital Channels 7
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 109
To switch a single channel on or off
1 Open the Digital dialog box by selecting the digital channels badge or by
choosing Sources > Digital Channels....
2 In the Channels tab, select an individual digital channel cell to toggle its
display.
To switch multiple digital channels on or off
1 Open the Digital dialog box by selecting the digital channels badge or by
choosing Sources > Digital Channels....
2 In the Channels tab, swipe multiple digital channel cells to toggle their
selection.
If you want to switch the digital channels off, clear the On check box or press
[Digital] key.
To reposition a digital channel
1 Open the Digital dialog box by selecting the digital channels badge or by
choosing Sources > Digital Channels....
2 In the Channels tab, select Display Order....
3 In the Display Order dialog box:
You can:
• Drag a digital channel to a new position in the list. The order in the list is the
same that appears in the waveform grid.
To Next Page
Loading...
