Keysight InfiniiVision HD3 Series - To Recall Setup Files; To Recall Mask Files; To Recall Reference Waveform Files from a USB Storage Device

270 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
21 Save/Email/Recall (Setups, Screens, Data)
You can also recall setups and mask files by loading them using the File Explorer.
See
"File Explorer" on page 277.
You can also configure the Setup > (Quick Action) menu item to recall setups, masks,
or reference waveforms. See "Configuring the (Quick Action) Menu Item" on
page 291.
To recall setup files
Setup files can be recalled from internal (\User Files) locations or from an external
USB storage device.
1 From the main menu, choose File > Open....
2 In the Open dialog box, from the Format drop-down menu, select Setup (*.scp).
3 If you would like to clear the display, select Clear Display.
4 Use the controls in the bottom of the dialog box to select the file to be recalled.
5 Select Open.
To recall mask files
Mask files can be recalled from one of four internal (\User Files) locations or from
an external USB storage device.
1 From the main menu, choose File > Open....
2 In the Open dialog box, from the Format drop-down menu, select Mask (*.msk).
3 If you would like to clear the display or clear the recalled mask, select Clear
Display or Clear Mask.
4 Use the controls in the bottom of the dialog box to select the file to be recalled.
5 Select Open.
To recall reference waveform files from a USB storage device
1 From the main menu, choose File > Open....
2 In the Open dialog box, from the Format drop-down menu, select Reference
Waveform data (*.h5).
3 From the To Ref: drop-down list, select the desired reference waveform location.
4 If you would like to clear the display of everything except the reference
waveform, select Clear Display.
5 Use the controls in the bottom of the dialog box to select the file to be recalled.
6 Select Open.