132 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
9 Display Settings
See Also • "To save BMP or PNG image files" on page 263
To adjust waveform intensity
You can adjust the intensity of displayed waveforms to account for various signal
characteristics, such as fast time/div settings and low trigger rates.
Increasing the intensity lets you see the maximum amount of noise and
infrequently occurring events.
Reducing the intensity can expose more detail in complex signals as shown in the
following figures.
1 From the menu, choose Setup > Waveform Intensity....
2 In the Intensity dialog box, to adjust the waveform intensity, either drag the
slider, select the up or down buttons, or select the Waveform Intensity field to
enter the percent value or turn the Entry knob.
Waveform intensity adjustment affects analog channel waveforms only (not math
waveforms, reference waveforms, digital waveforms, etc.).
To Next Page
Loading...
