Keysight InfiniiVision HD3 Series - To Save CSV, ASCII XY, or bin Data Files

264 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
21 Save/Email/Recall (Setups, Screens, Data)
See Also • "To add an annotation" on page 130
To save CSV, ASCII XY, or BIN data files
Data files can be saved to an external USB storage device.
1 From the main menu, choose File > Save....
2 In the Save dialog box, from the Format drop-down menu, select one of:
• CSV data (*.csv) — See "CSV Data" on page 265.
• ASCII XY data (*.csv) — See "ASCII XY Data" on page 265.
• Binary data (*.bin)
3 With data files files, you can select these options:
• Setup Info — Setup information (vertical, horizontal, trigger, acquisition,
math, and display settings) is also saved in a separate file with a TXT
extension.
• Max Length — Specifies that the maximum number of waveform data points
be saved. See
"Length Control" on page 265.
• Length — Sets the number of data points that will be output to the file. For
more information, see
"Length Control" on page 265.
• Save Segment — When data is acquired to segmented memory, you can
specify whether the Current displayed segment is saved or All acquired
segments are saved. (See also
"Saving Data from Segmented Memory" on
page 174.)
4 Select the File Name field, and enter the name of the file you want to save.
5 Use the controls in the bottom of the dialog box to navigate to the location of
the file to be saved.
6 Select Save.
See Also •
"Binary Data (.bin) Format" on page 309
• "CSV and ASCII XY files" on page 315
• "Minimum and Maximum Values in CSV Files" on page 316
NOTE
When saving screen images, the oscilloscope uses the screen before the Save dialog box was
opened.
To save a screen image showing the Save dialog box, press the [Save Screen] instead.
NOTE
You can also save the oscilloscope's display image using a web browser. See "Get Image" on
page 297 for details.