19
Keysight InfiniiVision HD3-Series Oscilloscopes
User's Guide
1 Getting Started
Inspect the Package Contents / 19
Learn the Front Panel Inputs and Outputs / 21
Learn the Back Panel Inputs and Outputs / 22
Tilt the Oscilloscope for Easy Viewing / 24
Power-On the Oscilloscope / 25
Select the User Interface Language / 26
Connect Probes to the Oscilloscope / 26
Input a Waveform / 27
Recall the Default Oscilloscope Setup / 27
Use Autoscale / 28
Compensate Passive Probes / 29
Learn the Front Panel Keys and Knobs / 30
Using the Touchscreen User Interface / 35
This chapter describes the steps you take when using the oscilloscope for the first
time.
Inspect the Package Contents
• Inspect the shipping container for damage.
If your shipping container appears to be damaged, keep the shipping container
or cushioning material until you have inspected the contents of the shipment
for completeness and have checked the oscilloscope mechanically and
electrically.
• Verify that you received the following items and any optional accessories you
may have ordered:
• InfiniiVision HD3-Series oscilloscope.
• Power cord (country of origin determines specific type).
• Oscilloscope probes:
To Next Page
Loading...
