Web Interface 23
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 297
Remote GUI Access Using VNC
To access the oscilloscope's graphical user interface (GUI) on a remote computer
using VNC (Virtual Network Computing) client software:
1 If VNC viewer software is not installed on your remote computer, do that first.
2 Run the VNC viewer software.
3 Give the oscilloscope's hostname or IP address as the name of the VNC server
to connect with.
4 Connect.
5 Once the VNC viewer connection opens, you can interact with the
oscilloscope's GUI like you would on the oscilloscope.
Get Image
To save (or print) the oscilloscope's display from the web interface:
1 Access the oscilloscope's web interface (see "Accessing the Web Interface" on
page 294).
2 When the oscilloscope's web interface is displayed, select the Get Image tab.
After a delay of several seconds, the oscilloscope's screen image will be
displayed.
Click Refresh Image to get an updated screen image.
3 Right-click on the image and select Save Picture As... (or Print Picture...).
To Next Page
Loading...
