148 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
10 Triggers
One oscilloscope channel probes the clock signal and another channel probes the
data signal.
To trigger on setup and hold violations:
1 Open the Trigger dialog box by selecting the trigger badge or by choosing
Trigger > Setup... from the main menu.
2 In the Trigger Type drop-down list, select Setup and Hold.
3 Select the Clock analog or digital channel with the clock signal.
4 From the Slope drop-down list, select a Rising or Falling clock edge.
5 Select the Data analog or digital channel with the data signal.
6 Select the < Setup field and enter the setup time value.
7 Select the < Hold field and enter the hold time value.
8 Select Trigger Levels... to open the Trigger Levels dialog box where you can
adjust the trigger levels for the input channels being used.
Data
Clock
(rising
edge)
Setup time Hold time
To Next Page
Loading...
