150 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
10 Triggers
5 If there are multiple waveforms in a grid or existing zones, a dialog box appears:
• Zone — When replacing an existing zone, this drop-down list lets you select
the zone being replaced.
• Source — Selects the analog channel input source that the zone is associated
with.
• Logic — When combined with other zones, specifies whether this zone is
ANDed or ORed with the previous zone.
Zones can be dragged on the screen using the center handle. Zones can be
resized using the lower-right corner handle.
The upper-right corner edit (pencil) icon opens the full Zone Trigger dialog box.
To Next Page
Loading...
