Acquisition Control 12
Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide 175
The actual sample rate used is displayed at the top of the Acquire dialog box
and in the sample rate and memory depth (Acquire) badge.
Only certain sample rates are available. If the sample rate you want is not
possible, the next lower available sample rate is used.
4 Select the Max Memory Depth field and turn the Entry knob or use the keypad
dialog box to enter the desired acquisition memory depth.
The actual memory depth used is displayed at the top of the Acquire dialog box
and in the sample rate and memory depth (Acquire) badge.
5 Press the front panel [Run] or [Single] keys, or choose Crontrol > Run/Stop or
Control > Single.
To Next Page
Loading...
