286 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
22 Utility Settings
Disabled settings are secure, and enabled settings are insecure.
When changing the non-volatile memory, LAN Port, USB Device Port, or USB Host
Ports settings, you must reboot the oscilloscope for the change to take place.
Select Lock Panel to lock the enhanced security options panel.
To change the enhanced security password:
1 From the main menu, choose Utilities > User Options....
2 In the User Options dialog box, select the Enhanced Security tab.
3 Select Unlock Panel.
4 In the Password dialog box, select New Password.
5 In the New Password dialog box, select the Current Password field and enter the
existing password.
6 Select the New Password field and enter the new password.
7 Select the Repeat Password field and re-enter the new password.
8 Select Set Password.
9 In the confirmation dialog, read the warning information. Then, select OK.
To reset (clear) the enhanced security password:
1 From the main menu, choose Utilities > User Options....
2 In the User Options dialog box, select the Enhanced Security tab.
3 Select Unlock Panel.
4 In the Password dialog box, select Reset Password.
5 In the Reset Password dialog box, select the Current Password field and enter the
existing password.
6 Select Reset Password.
7 In the confirmation dialog, select OK.
To Next Page
Loading...
