4 Keysight InfiniiVision HD3-Series Oscilloscopes User's Guide
• Interleaved (full) or non-interleaved (half) MegaZoom IV memory for the fastest
waveform update rates, uncompromised.
• Trigger types: edge, pulse width, pattern, OR, rise/fall time, runt, and setup &
hold.
• Zone trigger.
• Protocol decode/trigger options for: CAN, I
2
C, LIN, SPI, and UART/RS232.
Listing window for protocol decode.
• Math waveforms:
• Arithmetic — add, subtract, multiply, and divide.
• Transforms — absolute value, Ax+B, base 10 exponential, common
logarithm, differentiate, exponential, integrate, natural logarithm, square
root, and squared.
• FFT — magnitude and phase.
• Filters — band pass filter, low pass filter, high pass filter, averaged value,
envelope, and smoothing.
• Visualizations — magnify, max hold, maximum, measurement trend, min
hold, minimum, and peak-peak.
• Reference waveforms (2) for comparing with other channel or math waveforms.
• Many built-in measurements and a measurement statistics display.
• Built-in license-enabled 100 MHz waveform generator with: arbitrary, sine,
square, ramp, pulse, DC, noise, sine cardinal, exponential rise, exponential fall,
cardiac, and gaussian pulse.
• USB and LAN ports make saving and sharing data easy.
• Online Help information is built into the oscilloscope.
For more information about InfiniiVision oscilloscopes, see:
www.keysight.com/find/scope
To Next Page
Loading...
