LIP-7024LD User Guide
36
OPERATION
In iPECS-Lik
To send an SMS message to another iPECS display Phone:
ï‚· Press the TRANS/PGM button,
ï‚· Dial 36 (SMS send code),
ï‚· Dial 1 to resend an existing message, or 2 to send a new or edit an
existing message,
ï‚· Enter the station range to receive the message, to send to a single
station enter the station number twice,
ï‚· Dial your message using 2 key strokes for each character,
ï‚· Press HOLD/SAVE to send your message.
To view your received Short text messages:
ï‚· Press the flashing CALL BACK button, the LCD shows the Message
Summary display,
STA CLI VSF VMS UMS SMS
001 001 005 006 001 004
ï‚· Dial 6, the first two SMS messages are shown in brief,
ï‚· Dial the Message number to view the entire SMS message.
To delete received Short text messages:
ï‚· Press the # key,
ï‚· Dial 1 to delete the message, 2 to cancel or 3 to delete all received
Short text messages.
In iPECS-MG
To send an SMS message to another iPECS display phone user:
ï‚· Press the TRANS/PGM button,
ï‚· Dial 43 (SMS send code),
ï‚· Dial the station number to receive the message
ï‚· Press HOLD/SAVE.
ï‚· Enter your message using 2 key strokes for each character, see
section 4.3.4,
ï‚· Press HOLD/SAVE to send your message.
To view your received Short text messages:
ï‚· Press the flashing CALL BACK button, the LCD shows the Message
Summary display,
MWI (01) VMS (00) SMS(00)
ENTER(MWI:1,VMS:2,SMS :3)
ï‚· Dial 3 (retrieve SMS), the first two SMS messages display in brief,
ï‚· Dial the Message number to view the entire SMS message.