LG-Ericsson LDP-7008 D User Manual

LIP-8012D & LIP-8024D User Guide
13
NOTE—When the BTU is used for a call, the Speaker
button LED will illuminate and the speaker mode cannot
be used. If the phone handset is taken off-hook while in
To pair the wireless headset to the BTU:
 Press the HEADSET button,
 Dial 3(iPECS-LIK)/2(iPECS-MG),
 Press the HOLD/SAVE button.
To enable/disable the wireless headset:
 Set the Bluetooth headset to pairing mode,
 Press the
TRANS/PGM button,
 Dial *8(iPECS-LIK)/63(iPECS-MG),
 Dial 1(enable).
 Press the HOLD/SAVE button,
 Press the Next soft button,
 Press the OK soft button,
 Enter the PIN code referring to the Bluetooth headset
manual (default=0000),
 Press OK
Soft button.
To unpair the BTU headset:
 Set the Bluetooth headset to pairing mode,
 Press the
TRANS/PGM button,
 Dial *8(iPECS-LIK)/63(iPECS-MG),
 Dial 2 (disable),
 Press the OK soft button.
To check BTU paired information:
 Press the TRANS/PGM button,
 Dial *8(iPECS-LIK)/63(iPECS-MG),
 Dial 3,
 Press the OK
soft button.
To use the BTU headset:
 Press the S
PEAKER button,
OR
 Press the Call Start button on the BTU headset,
 Place call as you normally would.
To answer a call with the BTU headset:
 When an incoming call is received, ringing will be
present at the Station and the BT headset,
 Press the BT Call Start button, or press the Speaker
button,
OR
 Lift the handset.

LG-Ericsson LDP-7008 D Specifications

General

Brand	LG-Ericsson
Model	LDP-7008 D
Category	Telephone
Language	English