LIP-8012D & LIP-8024D User Guide
14
BT mode, the voice path will directly be connected to
the handset; press the Speaker button to activate the
BTU headset.
2.4 Using a Serial DSS
The LIP-8012DSS, LIP-8012LSS, and LIP-8048DSS
can be connected with the LIP-8012D or LIP-8024D
using the RS-232 cable. Be sure to verify the serial
DSS and LSS capacities with the iPECS System to
ensure usability (refer to iPECS Manual). The following
graphics show the front and rear view of each.
NOTE—A Linked Pair slave station cannot use a serial
DSS.
LIP-8012DSS
To Next Page
Loading...
Need help?
General
