3 Soft & Navigation Button
9
The 3 Soft Buttons are located on the bottom of the LCD display. The function of each
button changes, subject to call status and progress. The current functions are displayed
on the LCD screen, directly above each button. For example, if the user calls a busy
extension, busy tone will be heard and the busy status displayed. The LCD screen will
display the busy message along with the different options available - “Call Back”,
“Flash” , “Call Wait” , “Camp On” and “Pilot Hunt”. By pressing the relevant button the
desired feature is activated.
3 Soft Button
Navigation Button
In some instances, more than 3 current functions are available to the user, and this is
indicated by the appearance of a left (◀) or right (▶) arrow in the LCD screen, (see
below). By pressing the navigation key (located below the volume button), in the
direction corresponding to the arrow, any additional functions will be displayed.
BUSY : 100
12 OCT 09 12:00 pm
C-BACK FLASH ▶
STATION 100 (T)
12 OCT 09 12:00 pm
LOG DIR REDIAL ▶
STATION 100 (T)
12 OCT 09 12:00 pm
◀ PICKUP FWD DND
BUSY : 100
12 OCT 09 12:00 pm
◀ C-WAIT CAMPON P-HUNT
To Next Page
Loading...
Need help?
General
