Basic Function
The 3 soft button enables you to select the various function. For instance, if you want to
select the pickup, press the first button on the left as below shown. And if there are more
than three functions and displays an arrow on LCD, use Navigation Button to move the
next or previous function.
3 Soft Button is located on the bottom of the LCD display and IP LDK systems provide.
1. Idle
1.1 Pickup
10
LOG : press to check call log information
DIR : press to use Directory Service.
(Station/System Speed)
REDIAL : press to redial last number called.
STATION 100 (T)
12 OCT 09 12:00 pm
LOG DIR REDIALâ–¶
PICKUP : press to pickup a call ringing
within the same pickup group.
FWD : Press the [FWD] button to forward
calls to another station, Voicemail etc.
DND : press the [DND] to set Do Not
Disturb.
STATION 100 (T)
12 OCT 09 12:00 pm
â—€ PICKUP FWD DND
CALL TO STA 104 PICKED UP
CALLER 101 12:00 pm
TRANS CONF MUTEâ–¶
A station can pickup a call ringing to an unattended station within the same pickup group
by using the pickup procedure.
＊ Refer to iPECS-MG system programming manual.
Press [PICKUP] button.
Talk
STATION 100 (T)
12 OCT 09 12:00 pm
â—€PICKUP FWD DND
To Next Page
Loading...
Need help?
General
