To Next Page

To Previous Page

Reference Only

ACCESSORIES MLC650 SERVICE/MAINTENANCE MANUAL

10-16

Published 09-09-16, Control # 229-09

ROTATING BED JACK STOWAGE

CYLINDER

General

This part of Section 10 provides operational information and

electrical and hydraulic schematics for the rotating bed jack

stowage cylinder.

Additional component information for this system can be

found in the following sections of the Service Manual:

• Section 2: Hydraulics

• Section 3: Electrical

The rotating bed jack stowage cylinders are controlled by the

setup remote.

NOTE: The rotating bed jacks stowage is covered in

Section 4: Store Rotating Bed Jacking Cylinders of

the Operator Manual.

See Figure 10-13

for an illustration of the jack cylinder in the

stowed position. The right front jack cylinder is shown.

See Figure 10-14

for the hydraulic schematic of the rotating

bed jack stowage cylinder circuit.

See Figure 10-15

for the electrical schematic of the rotating

bed jack stowage circuit.

Item Description

1 Rotating Bed Jack Cylinder (stowed position)

2 Rotating Bed Jack Stowage Cylinder

FIGURE 10-13

Manitowoc MLC650 Service Maintenance Manual

Other manuals for Manitowoc MLC650