BIGFOOT GEAR HOUSING
Page 6B-16 90-857046R1 NOVEMBER 2001
Bearing Carrier and Propeller Shaft
1. Remove fasteners.
51117
a
a
a- Fasteners
2. With propeller shaft horizontal, pull carrier (using tool shown) to break seal with gear
housing.
3. Remove bearing carrier/propeller shaft components as an assembly by pulling back on
the propshaft. Take care not to lose cam follower or 3 metal balls in end of propeller shaft.
4. Remove propeller shaft from bearing carrier.
51116
a
b
c
d
e
a- Bearing Carrier
b- Puller Jaws (91-46086A1)
c- Puller Bolt (91-85716)
d- Thrust Hub
e- Propeller Shaft
To Next Page
Loading...
