Moog Animatics SmartMotor™ Developer's Guide,Rev. L
Page 821 of 909
Zv
Reset Velocity Limit Fault
APPLICATION: Reset
DESCRIPTION: Resets a velocity error fault
EXECUTION: Immediate
CONDITIONAL TO: N/A
LIMITATIONS: N/A
READ/REPORT: RBv
WRITE: N/A
LANGUAGE ACCESS: N/A
UNITS: N/A
RANGE OF VALUES: N/A
TYPICAL VALUES: N/A
DEFAULT VALUE: 0
FIRMWARE VERSION: 5.x and later
COMBITRONIC: N/A
DETAILED DESCRIPTION:
The Zv command is used to reset a velocity error fault.
EXAMPLE:
Zv 'Reset Velocity Fault status bit
RELATED COMMANDS:
R
Bv Bit, Velocity Limit (see page 342)
Z Total CPU Reset (see page 806)
Z(word,bit) Reset Specified Status Bit (see page 808)
ZS Global Reset System State Flag (see page 818)
Part 2: Commands: Zv
To Next Page
Loading...
