Overview
2-76
ids Intrusion detection parameters.
• configured-bad-essids – Display the list of configured bad essids. This
sets the number of seconds for which the MU will be filtered.
• filter-list – Displays the list of currently filtered mobile units.
known (ap) (statistics)
<1-256>
Known AP related parameters.
• ap – A known ap index <1-256>.
• statistics – Known Adaptive AP Stats.
• <1-256> – Displays one or more adaptive ap known ap statistics.
mac-auth-local List out the mac-auth-local entries.
• <1-1000> – Displays mac-auth-local entry.
mesh (statistics) <1-32>
(detail)
Mesh related parameters.
• statistics – Mesh statistics.
• <1-32> – A mesh index.
• detail – Detailed mesh statistics.
mobile-unit Details of associated mobile unit.
• <1-8192> – Index of mobile unit.
• AA-BB-CC-DD-EE-FF – MAC address of mobile unit.
• association-history <mac adress> – Displays mobile unit history. Enter
the mobile unit MAC address in AA-BB-CC-DD-EE-FF format.
• probe-history ( ) – Displays MU probe-history.
• <1-200> – Index to display probe-logging.
• config-list – List probe history MAC addresses.
• radio <1-4096> – Show mobile units associated with this radio.
• statistics – Mobile unit rf statistics.
• wlan <wlan_range> – Shows mobile units associated to this WLAN.
multicast-packet-limit Multicast packet limit.
phrase-to-key Displays the WEP keys generated by a passphrase.
• wep128 – Displays WEP128 keys.
• wep64 – Displays WEP64 keys.
qos-mapping Quality of Service mappings used for mapping WMM access categories and
802.1p / DSCP tags.
• wired-to-wireless – Mappings used when traffic is switched from wired
to the wireless side.
• wireless-to-wired – Mappings used when traffic is switched from
wireless to the wired side.
To Next Page
Loading...
Need help?
General
