NEC SL1000 - Page 431

Item No. Name Input Data Description
01 Action 0 = UND (Undefined)
1 = TRF (Transfer)
2 = UTRF (Unscreened Transfer)
3 = REC1
4 = REC2
5 = LOGON
6 = Hang Up
7 = GOTO
• TRF Action - Screened Transfer (1) (TRF)
• UTRF Action - Unscreened Transfer (2) (UTRF)
• REC1 Action - Quick Message With Greeting (3) (REC1)
• REC2 Action - Quick Message Without Greeting (4)
(REC2)
• LOGON Action - Log Onto Voice Mail (5) (LOGON)
• Hang Up Action (6) (HNGUP)
• GOTO Action - Go to Mailbox (7) (GOTO)
• UND Action - Undefined Routing (0) (UND)
Data Upto8digits
(0~9,
*
,#)
X = Caller Dialed Digits
I = Ignore Digits
N=NoRouting
P = Pause
• Digits
Entry:0~9,#,and
*
(8 digits max.)
Use Dial Action Table digits to route an Automated At-
tendant call to a specific location (such as an exten-
sion). For example, to set up a TRF Action to route to
extension 305, for 3 enter TRF for the Action and 305
for the corresponding Number.
• Caller Dialed Digits
Entry : X(Entered by pressing LK2)
Use the X option to route an Automated Attendant call
based on digits the caller dials. Each X entry represents
one caller dialed digit. For example, to set up a TRF Ac-
tion to route to any caller dialed extension in the 301 ~
399 range, for 3 enter TRF for the Action and XXX for
the corresponding Number.
• Ignore Digits
Entry : I(Entered by pressing LK3)
Use the I option to represent any digit dialed by the Au-
tomated Attendant caller that PZ-VM21 InMail ignores
for routing. An example of this is REC action assigned to
the
*
key in Dial Action Table 1 by default. The Action is
REC2 and the Number is IXXX. This means that a caller
can dial
*
+ any mailbox number to leave a Quick Mes-
sage in that mailbox. InMail ignores the first digit dialed
by the caller (
*
), and routes according to the next 3 dig-
its dialed.
• No Routing
Entry : N(Entered by pressing LK1)
Use the N option when you want no Automated Atten-
dant routing to automatically occur. This can be used
with the LOGON action when you want to prompt the
caller to enter a mailbox number. To do this for the # key
(for example), for the # key enter LOGON for the Action
and N for the corresponding Number. When the caller
dials #, they hear, Please enter the mailbox number. Or,
to exit, press the pound key.
• Pause
Entry : P(Entered by pressing LK4)
Use the P option when you want the Automated Atten-
dant to pause while dialing.
Defaults
Dial Action Table Default Settings
Key
Dial Action Table 1 Dial Action Table2~16
Action Data Action Data
1 0 (UND) 0 0 (UND) 0
2 2 (UTRF) XXX 0 (UND) 0
3 2 (UTRF) XXX 0 (UND) 0
4 0 (UND) 0 0 (UND) 0
5 0 (UND) 0 0 (UND) 0
6 0 (UND) 0 0 (UND) 0
ISSUE 1.0 SL1000/SL1100
Program
47
Programming Manual 2-409