NEC SL2100 - Page 497

Dial Action Table Default Settings
Key
Dial Action Table 1 Dial Action Table 2 ~ 32
Action Data Action Data
8 0 (UND) No Setting 0 (UND) No Setting
9 6 (Hang Up) No Setting 0 (UND) No Setting
10 2 (UTRF) 101 0 (UND) No Setting
11 3 (REC1) IXXX 0 (UND) No Setting
12 5 (LOGON) IXXX 0 (UND) No Setting
13 2 (UTRF) 101 0 (UND) No Setting
TIMEOUT provides the routing for rotary dial callers.
Note
If Action is set 0 or 6 skip Data setting.
"XXX"= change as it fit
The “Data” data needs to follow these rules below.
0 (UND) = none
1 (TRF) = dial data (any), X, I, N, or P
2 (UTRF) = dial data (any), X, I, N, or P
3 (REC1) = mailbox number (subscriber or group)
4 (REC2) = mailbox number (subscriber or group)
5 (LOGON) = mailbox number (subscriber or group)
6 (HANGUP) = none
7 (GOT
O) = routing mailbox number index (1 ~ 32)
Otherwise it will not be routed properly.
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-473
Program
47