-196-
Library error code (2/16)
Failed in data acquisition from DHCP server.
(FRU)
DHCP Server, LAN cable, Controller board
1. Check server.
2. Check DHCP configuration.
3. Check LAN cable connection.
4. To power cycle the library.
Failed in time data acquisition from time
server.
(FRU)
Time Server, LAN cable, Controller board
1. Check server.
2. Check NTP configuration.
3. Check LAN cable connection.
4. To power cycle the library.
The abnormalities of the destination of a
microcode download file were detected.
The reading of the target mark is abnormal.
(FRU)
Drive, Maintenance chassis
1. To power cycle the library.
To Next Page
Loading...
