NEC T30A - Page 248

-221-
D-2 Drive Tape Alert
Code
Flag
Contents - Action
3
Hard Error
The operation has stopped because an error has occurred
while reading or writing data which the drive cannot correct.
・Call to maintenance staff.
4
Media
Media can no longer be written or read or performance is
severely degraded.
・Exchange the tape cartridge.
5
Read Failure
The tape is damaged or the drive is faulty.
・Clean Drive.
・Exchange the tape cartridge.
・Call to maintenance staff.
6
Write Failure
The drive can no longer write data to the tape.・Clean Drive.
・Exchange the tape cartridge.
・Call to maintenance staff.
7
Media Life
Media Life.
・Exchange the tape cartridge.
8
Not Data Grade
The cartridge is not data-grade.
・Exchange the tape cartridge.
9
Write Protect
The WRITE command was attempted to a write-protected
tape.
・After release of the write-protect, please try again.
・Exchange the tape cartridge.
10
No Removal
A manual or software unload was attempted when Prevent
Media Removal was on.
・ Allow medium removal via Prevent/Allow Medium
Removal command.
11
Cleaning Media
The tape in the drive is a cleaning cartridge.
12
Unsupported Format
You attempted to load a cartridge with an unsupported tape
format.
・Exchange the tape cartridge.
15
Memory Chip in
Cartridge Failure
The memory chip failed in the cartridge.
・Exchange the tape cartridge.
16
Forced Eject
The operation has failed because the tape cartridge was
manually ejected while the tape drive was actively writing or
reading.
17
Read Only Format
Media loaded is Read-Only format.
18
Tape Directory
Corrupted
The tape directory on the tape cartridge has been corrupted.
File search performance will be degraded. The tape directory
can be rebuilt by reading all the data on the cartridge.
・Exchange the tape cartridge if the phenomenon occurs
again.
19
Nearing Media Life
Nearing media life
・Exchange the tape cartridge.
20
Clean Now
Clean now
・Clean Drive.。
21
Clean Periodic
Clean periodic
・Clean Drive.