DANGER
■ Before use of the machine, read and full understand this Operation Manual.
• The machine can be used safely and reliably when operated and
maintained as specified in the manual.
• Before operating the machine, read and full understand the manual to
avoid human injury and the machine damage.
■ Be familiar with procedure how to stop the machine without delay.
• Be familiar with procedure how to stop the machine without delay in
emergency to avoid serious problem occurrence.
• The machine shall be operated by well trained and qualified person only
unless otherwise instructed formally.
Be familiar with procedure how to correct the machine when it is stopped
accidentally.
• Correct the machine as prescribed in the manual after checking the
stopped machine conditions.
DO NOT touch any board, wiring and terminal with hand in all the cases
other than maintenance mode.
• DO NOT touch any non-insulated wiring and terminal.
• DO NOT touch any board with wet hand.
• Disconnect plug from receptacle when any terminal bed is manipulated.
■ Take care of the following when patient is connected to the machine or
disconnect from it.
• DO NOT allow air ingress into patient body.
• DO NOT connect blood line to patient before starting priming operation.
• DO NOT connect blood line to patient during rinsing operation.
• Take care for patient not to be contaminated with harmful virus or
chemical.
• DO NOT connect bloodline to patient during releasing any alarm function.
It may critically causing death or severe injury of patient in this case.
■ Check frequently whether blood line is connected correctly to avoid danger
to patient due to blood leak caused by disconnection of the line when
incorrectly connected, and due to rupture of the line caused by excess
pressure application.
CAUTION-2
To Next Page
Loading...
