8-8
No. Component Purpose and function
34 Set left time increasing SW
SW used to increase displayed left dialysis time
digitally
35 Set left time decreasing SW
SW used to decrease displayed left dialysis time
digitally
36 FUNCTION 1 SW SW used to set various parameters
Set data is indicated in message screen.
37 FUNCTION 2 SW SW used to set various parameters
Set data is indicated in message screen.
38 FUNCTION 3 SW SW used to set various parameters
Set data is indicated in message screen.
39 FUNCTION 4 SW SW used to set various parameters
Set data is indicated in message screen.
40 FUNCTION 5 SW SW used to set various parameters
Set data is indicated in message screen.
41 Bubble sensor activating
SW with lamp
SW use to activate bubble sensor
Sensor activation is indicated by lamp lighting.
42 Syringe pump fast infusion
SW
SW use to operate syringe pump at fast infusion rate
43 Syringe pump flow rate
indicating LED
LED used to indicate flow rate of syringe pump digitally
44 Set syringe pump flow rate
increasing SW
SW used to increase set syringe pump flow rate
45 Set syringe pump flow rate
decreasing SW
SW used to decrease set syringe pump flow rate
46 Syringe pump operating
SW with lamp
SW used to operate syringe pump
Pump operation is indicated by lamp lighting.
47 Blood pump flow rate
indicating LED
LED used to indicate BP flow rate digitally
48 Blood pump flow rate
setting
volume
Volume used to set BP flow rate
49 Blood pump operating SW
with lamp
SW used to operate blood pump
Pump operation is indicated by lamp lighting.
To Next Page
Loading...
