HOTSPOT GATEWAY
System Administration 167
1. From the Web Management Interface, click on Subscriber Administration, then
Add. The Add a Subscriber Profile to the Database screen appears:
2. Choose Subscriber or Device for this profile.
3. Define the DHCP Address Type: Public or Private (only used when the IP
Upsell feature is enabled, otherwise leave this set to “private”).
4. Leave the 802.1Q Device Port field blank.
5. Enter a valid MAC Address for the subscriber.
If you have chosen to manage this subscriber by user name only, you do not need
to enter a MAC address (but you must enter a user name).
To Next Page
Loading...
