HOTSPOT GATEWAY
66 System Administration
1. Select the Internal Web Server.
2. Enable or disable the SSL Support feature, as required. If you enable SSL
Support, you must provide a valid
Certificate DNS Name.
For more information about setting up SSL, go to “Setting Up the SSL Feature”
on page 283.
SSL support allows for the creation of an end-to-end encrypted link between the
HSG and its clients by enabling the Internal Web Server (IWS) to display pages
under a secure link—important when transmitting AAA information in a
network.
Adding SSL support to the HSG requires service providers to obtain digital
certificates from VeriSign™ to create HTTPS pages. Instructions for obtaining
certificates are provided by Nomadix.
Usernames
New
Subscribers
System Response
Disabled Enabled Allows new subscribers to enter the system
without giving a user name and password.
Enabled
(optional)
Enabled Allows new subscribers or authentication by
their user name and password.
Enabled Disabled New subscribers are not allowed. Only
existing subscribers are allowed after
authenticating their user name and password.
Disabled Disabled You will not use this combination unless you
want to lock out all subscribers.
To enable SSL Support, your HSG’s flash must include the server.pem,
cakey.pem, and cacert.pem certificate files (the “cacert.pem” file is
provided with your HSG). For assistance, contact “Appendix A:
Technical Support” on page 311.
You must reboot the HSG every time you enable or disable SSL Support.
To Next Page
Loading...
