HOTSPOT GATEWAY
System Administration 67
3. If you want to designate a portal page, you must enable the Portal Page feature,
otherwise leave this feature disabled.
4. If you enabled the Portal Page feature, provide the following supporting
information:
z Portal Page URL
z Parameter Passing (enabled or disabled)
z Portal XML POST URL
z Portal XML Post Port
z Support GIS Clients (enabled or disabled—see following note)
z Block IWS Login Page (enabled or disabled)
5. Enable or disable the Usernames feature, as required (refer to table in “Enabling
AAA Services with the Internal Web Server” on page 65).
Some subscribers may want additional account flexibility and security for their
services (for example, if they use more than one computer and their MAC
address changes, or if they move between port-locations). In this case, a
subscriber can define a unique user name and password which they can use from
any machine or location (without being re-charged). Subscribers who choose this
option are prompted for their user name and password whenever they try to
access the Internet. Solution providers can charge a fee for this service.
6. Enable or disable the New Subscribers feature (refer to table in “Enabling AAA
Services with the Internal Web Server” on page 65).
7. If you enabled New Subscribers, enable or disable the Relogin After Timeout
option.
The Portal Page IP or DNS address are added to the IP passthrough list
automatically.
GIS stands for Generic Interface Specification, a document written by
iPass. Enabling the Smart Client option in the HSG automatically
supports all GIS compliant clients using the Internal Web Server.
Enabling “Support for GIS Clients” under the Portal Page feature
means that the HSG will defer the managment of the GIS clients to the
Portal Page server.
New Subscribers must be enabled before enabling the Credit Card
options.
To Next Page
Loading...
