HOTSPOT GATEWAY
68 System Administration
8. You can now enable or disable the Credit Card Service. When this feature is
enabled, subscribers are prompted for their credit card information (for billing
purposes). The HSG is configured to use either Authorize.net or Chainfusion
(selected from a pull-down menu). You will need to open a merchant account
with Authorize.net, Chainfusion or Datacenter (Luxembourg) before this feature
can be used.
Please contact Nomadix Technical Support for assistance. Refer to “Contact
Information” on page 312.
9. If you enabled the Credit Card Service, define which service you require
(
Authorize.net or Chainfusion) from the pull-down menu.
10. If the Credit Card Service is enabled, enter the information for the following
fields:
z Credit Card Server URL
z Credit Card Server IP
z Merchant ID (a valid ID issued by the credit card reconciliation service
provider – Authorize.net or Chainfusion).
11. Enable or disable the SIM Compliant feature, as required. With this feature
enabled, you can change the transaction key at your discretion. To change the
transaction key, simply enter the key in the
Change Transaction Key box, then
re-enter the key in the
Verify Transaction Key box.
12. Enable or disable Smart Client Support, as required (if enabled, your license key
must support this feature).
All data communications between the HSG and the credit card server
are encrypted by the SSL (Secure Sockets Layer) protocol. The HSG
never “sees” subscriber credit card numbers. Your product license key
must support this feature.
DNS must be configured if you want to enter meaningful URLs instead
of numeric IP addresses into any of the HSG’s configuration screens
(for example, the Credit Card Server URL in the following step).
The SIM Compliant option refers to Authorize.net's Simple Integration
Method.
To Next Page
Loading...
