4
Setting up network printing
4-10 MP1020/1025/1035
so it is not necessary to assign them manually. However, note the follow-
ing when setting “DHCP Configuration” to “Auto-Obtain”.
Check with the network administrator that the DHCP server exists. If the
DHCP server does not exist, be sure to specify settings for “IP Address”,
“Subnet Mask”, and “Gateway Address”.
If the settings for the IP address and other items have been assigned us-
ing the DHCP server, there is a possibility that they may be automatically
changed. When the settings for the IP address and other items are
changed, if the IP address has been used to specify a printer on the net-
work for printing, there is a possibility that printing may not be possible
because this machine cannot communicate with the network. If “DHCP
Configuration” has been set to “Auto-Obtain”, it is recommended that the
IP address assigned to this machine be fixed in the DHCP server settings.
To Next Page
Loading...
Need help?
General