102
Maintenance
14
Y:YY : Required time
PH RECOVERING 1234567
REQUIRED TIME Y:YY
The cleaning is complete.
The print head cleaning operation (PH recovery) starts
automatically after the second wiping operation has
finished
Strong cleaning is automatically performed if a
given length of media has been printed since the
last cleaning operation.
15
PERFORM NOZZLE PRINT
Press the OK button.
MAINTENANCE
2
START MAINTENANCE
Missing dots are still found even after the cap cleaning...
If you still see missing dots even after the cap cleaning above, check the caps visually and remove foreign matters and
ink stains from them with a cleaning swab dampened with cap cleaning liquid.
To Next Page
Loading...
