Oki IP-6620 - Page 101

101
Maintenance
8
CAUTION

Be careful so that the cap cleaning liquid does not
adhere to any part other than the caps.

The cleaning swab (thick) is intended for a single use
only. Use a new cleaning swab (thick) for each cleaning.

If the caps are not completely clean after one cleaning
operation, use a new cleaning swab (thick) and clean the
caps again.

With the 6 color specication printer, the rightmost cap
does not need do be cleaned.
Clean the top surface of the caps by using the
cleaning swab (thick).
(1) First, pass the cleaning swab (thick) over the entire
circumference of each cap top surface to impregnate
the dirt on the surface with cap cleaning liquid.
Pass the cleaning swab (thick) starting from the
leftmost cap and continue to the rightmost cap in
order.
(2) Next, clean all the dirt by passing the cleaning swab
(thick) 5 times over the circumference of each cap
top surface.
Start from the leftmost cap and continue to the
rightmost cap in order.
9
CLEAN CAPS, CHECK
WIPER & CLOSE COVERS
Close the capping unit cover and the front
cover.
The carriage returns automatically to the home position.
10
CAP CLEANING COMPLETES?
Press the OK button.
11
START PH RECOVERY?
OK/CANCEL
Press the OK button.
Press the CANCEL button to skip the cleaning.
12
START PH RECOVERY
BOTTLE IS EMPTY?
Press the OK button.

This message is not displayed if you have pressed
the CANCEL button in step
11
.
13
2ND WIPING OPERATION
PLEASE WAIT 1:00
After the wiping of the print heads finishes, the carriage
moves to the home position.
Before printing Loading the media Adjustment
Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix