243
Troubleshooting
AUTO NOZZ MAP ERROR
Lc Lm C Y K M Gy
Meaning
An error occurred during automatic nozzle map.
Action
You are advised to follow the message instructions printed on the error
print result of automatic nozzle map.
(See When an error occurs with automatic conguration on
pa ge 113.)
PLEASE WARM THE ROOM
AND WAIT FOR A WHILE
Meaning
The ambient temperature is below the printer operating range.
Action
Operate the printer within the operating temperature range (15 to 30ºC).
You may also press the CANCEL button to suspend the printing.
ROOM TEMP TOO HIGH
PRINT? OK/CANCEL
Meaning
The ambient temperature exceeds the printer operating range.
Action
Operate the printer within the operating temperature range (15 to 30°C).
Press the OK button to start the printing.
You may also press the CANCEL button to suspend the printing.
DECREASE ROOM TEMP
STANDARD ND BI
Meaning
The ambient temperature exceeds the printer operating range.
Action
Operate the printer within the operating temperature range (15 to 30°C).
The printing resumes automatically after the ambient temperature has
decreased.
DECREASE ROOM TEMP
Meaning
The temperature of the room where the printer is installed is too low.
Action
Increase the room temperature to 5°C or above.
PLEASE WARM THE ROOM
Meaning
The temperature of the room where the printer is installed is too high.
Action
Cool the room to 35°C or lower.
AN ERROR OCCURRED
PLEASE WAIT
Meaning
An error was detected during printing.
Action
Wait until the error message is displayed.
If no error messages are displayed after five minutes, restart the printer.
<LCIS model>
NO MORE INK AVAILBLE
USE EXTENSION CHIP
Meaning
No more ink is available for use.
Action
Read an ink amount extension chip with the printer.
Before printing Loading the media Adjustment Maintenance
Advanced
operations
Troubleshooting
Menu tree Appendix
To Next Page
Loading...
