Oki ML1120 - Page 248

Technical Reference Guide – Appendix D – Media specifications > 248
An uncut (approx. 0.5 – 1 mm) is to be provided around
both upper corners of each label.
> Label adhesive squeeze-out must not be allowed onto the
front surface of label paper.
> The use of label paper with cloth facestock is prohibited.
Dimensions conform to those of continuous paper specified in
“Vertical and horizontal dimensions” on page 223.
DIMENSION VALUE
A 14 – 22.2 mm (11/20 – 7/8 in) for paper width
304.8 mm (12 in)
12.7 – 22.2 mm (1/2 – 7/8 in) for paper width
279.4 mm (11 in) or less
B 2.54 mm
C 2 mm or more
D 12.7 mm (1/2 in) or more
E
A
E
D
B
C
B
C
F
G
F
Paper feeding direction
50 or more
0.5~1
Uncut
0.5~1
Uncut
25 or more
R4~R5
each corner
Horizontal
perforation
Uncut
(each side)
1~2
All dimensions in mm