Oki ML1120 Technical Reference Guide

Technical Reference Guide – Appendix D – Media specifications > 249
NOTE
The total thickness of the label and the substrate must be
0.2 mm or less. The label paper and the substrate paper must
each be 0.1 mm or less.
When wrapped on the surface of a 27 mm diameter cylinder,
label paper must be such that the labels do not peel off.
Label glue strength: use a label that does not peel off under
the following conditions.
E 6.35 mm (1/4 in) or more
F 6.35 mm (1/4 in) or more
(12.7 mm or more is desirable)
G 8.47 mm (1/3 in) or more
(line feed accuracy assurance range)
DIMENSION VALUE
(Drum diameter φ27)
Label
φ27mm
180
˚
24 hours
40
˚ C
30%
Wrap Drum Diameter
Wrap angle
Wrap time
Ambient temperature
Ambient humidity

Oki ML1120 Specifications

General

Noise level	49.7 dB
Maximum duty cycle	18000 pages per month
Maximum number of copies	9 copies
Power requirements	120 - 220V
Dimensions (WxDxH)	889 x 587 x 379 mm

Weight and Dimensions

Dimensions (W x D x H) (imperial)	35 x 23.1 x 14.9 \